-
使用引腳復用減少8位單片機的引腳使用
本文將介紹兩個利用通用輸入/輸出(GPIO)引腳復用來減少項目引腳使用的示例。第一個示例使用了“查理復用算法”技術,第二個示例使用了定時外設和中斷來快速切換引腳輸入狀態和輸出狀態,以在驅動 LED 的同時讀取按鍵。
2023-09-26
引腳 單片機
-
MOS管系列在服務器電源上的應用
服務器電源是指使用在服務器上的電源(POWER),它和PC電源一樣,都是一種開關電源,指能夠?qū)⒔涣麟娹D(zhuǎn)換為服務器所需直流電的電源。
2023-09-24
REASUNOS瑞森半導體 MOS管 服務器電源
-
適用于熱插拔應用的具有導通電阻的高效 MOSFET
熱插拔是指將電子設備插入帶電電源;這可能會損壞相關電子設備。電容性負載可能會產生較大的負載電流,從而給電源、電纜組件和任何限流電路帶來壓力。此外,電纜寄生電感上的電壓變化會引起電壓尖峰,從而進一步損壞電子設備。
2023-09-24
熱插拔應用 導通電阻 MOSFET
-
LED 和檢測器 IC 的熱阻測量
該封裝安裝在低電導率測試板上,根據 JEDEC 標準,該測試板的尺寸為 76.2 mm x 76.2 mm。包相對居中??偣矞?zhǔn)備了兩個低電導率板用于測量。這些測試板由 FR-4 材料制成,銅跡線厚度符合低電導率板的 JEDEC 標準。所有板上都使用了經過測試的“良好”設備。所有熱阻測量數據列于圖 2 中。
2023-09-23
LED 檢測器 IC 熱阻測量
-
硅基氮化鎵在射頻市場的應用日益廣泛
氮化鎵技術將繼續在國防和電信市場提供高性能和高效率。射頻應用目前主要是碳化硅基氮化鎵(GaN-on-SiC)器件。雖然硅基氮化鎵(GaN-on-Si)目前不會威脅到碳化硅基氮化鎵的主導地位,但它的出現將影響供應鏈,并可能影響未來的電信技術。
2023-09-21
硅基氮化鎵 射頻市場
-
LED路燈電源設計
LED 比傳統燈泡和燈更高效。它們無需預熱時間即可達到亮度,這使得它們比熒光燈更好。這些裝置可以組裝并用于照明燈具。憑借提到的所有這些功能,LED 非常適合用于街道照明應用。
2023-09-21
LED路燈 電源設計
-
低壓電機驅動設計
本應用筆記介紹了采用表面貼裝封裝的 n 通道雙 MOSFET 的低壓電機驅動設計。它描述了使用不同電壓應用的設計,以及自適應 MOSFET 柵極驅動器,這是驅動雙 n 溝道半橋的第三種方法。
2023-09-21
低壓 電機驅動
-
使用電壓/電流模擬光耦合器進行隔離
隔離電壓/電流感測在工業應用中具有多種用途,如圖 1 所示。它可用于檢測電源浪涌時的過壓或斷電時的欠流。此外,它還提供信號隔離以及電噪聲和瞬態干擾的抑制,防止系統故障。ACPL-K370/K376 是具有內置電壓/電流閾值檢測電路的模擬光耦合器器件。該器件具有檢測精度高、交流或直流電壓檢測范圍寬...
2023-09-21
電壓模擬光耦合器 電流模擬光耦合器 隔離
-
驅動電源模塊密度的關鍵因素
依靠簡單的經驗法則來評估電源模塊密度的關鍵因素是遠遠不夠的,例如電源解決方案開關頻率與整體尺寸和密度成反比;與驅動系統密度的負載相比,功率密度往往以不同的速率變化;因此合理的做法是將子系統和相關器件分開分析。先進的封裝和3D電源封裝? (3DPP?) 技術可讓電源模塊密度匹配其服務的相應...
2023-09-21
電源模塊 密度 關鍵因素
- 復雜的RF PCB焊接該如何確保恰到好處?
- 電源效率測試
- 科技的洪荒之力:可穿戴設備中的MEMS傳感器 助運動員爭金奪銀
- 輕松滿足檢測距離,勞易測新型電感式傳感器IS 200系列
- Aigtek推出ATA-400系列高壓功率放大器
- TDK推出使用壽命更長和熱點溫度更高的全新氮?dú)馓畛淙嘟涣鳛V波電容器
- 博瑞集信推出低噪聲、高增益平坦度、低功耗 | 低噪聲放大器系列
- 基于GD32F407VET6主控芯片的永磁同步電機控制器設計
- 如何選擇和應用機電繼電器實現多功能且可靠的信號切換
- 基于APM32F411的移動電源控制板應用方案
- 數字儀表與模擬儀表:它們有何區別?
- 聚焦制造業企業貨量旺季“急難愁盼”,跨越速運打出紓困“連招”
- 車規與基于V2X的車輛協同主動避撞技術展望
- 數字隔離助力新能源汽車安全隔離的新挑戰
- 汽車模塊拋負載的解決方案
- 車用連接器的安全創新應用
- Melexis Actuators Business Unit
- Position / Current Sensors - Triaxis Hall